Learning the proper techniques for replacing coil springs on the vehicle is not as difficult as one may come to believe. Our simple guide on how to repair coil springs can be performed in the comfort of your home garage, alleyway or side street. Replacing bc racing is300 coil springs is usually required just because the current existing springs are beginning to show signs of wear and tear and need to be changed to restore its original handling and ride height.

Furthermore, one can notice that their springs are starting to wear only based on the reduced handling capabilities of their vehicle and a gradual lowering of their overall ride height. Even though coil springs take a long time to wear out them still and can be compromised. Replacing coil springs can be done almost anywhere and is not that challenging compared to other replacement parts on a vehicle.

The first thing you want to do is find a nice open area where you can safely jack the vehicle up and support it on secure and stable jack stands. Make sure to block the wheels with a stone or wooden block to prevent the vehicle from rolling away. The car or truck should be placed in park or first gear and should have the handbrake applied. Take the jack and remove it from the vehicle and begin the installation. You never want to work under a car without some stable support.

Now remove the tires and wheels and place them somewhere where they won`t be in your way. You can choose to put them just underneath the frame of the car as a safety cushion in case your jack stands give out. Some examples are things like shocks or brakes which inhibit your access to the springs themselves. Considering all makes and models of cars and trucks are entirely different, refer to a repair manual from either the dealer or automotive parts store to double check this matter.

One tool that you will need to own is a spring compressor. This particular device will need to be inserted into the coil spring and is one of the most crucial steps that you will need to do. Forgetting to compress the spring in this way may cause it to release all of its stored energy once the control arm is loosened which could result in tragic injuries which may even result in death. Even with the coil spring held in a compressed state, it is better to be safe than sorry and add a 2nd precaution by wrapping a metal chain around the spring and locking it into place. This way, if the spring compressor fails, the chain will immediately halt the season from recoiling and springing out at full force.

Once they are snugly fit into place, raise the control arm back into its original place. Now screw on all necessary bolts with the torque wrench and make certain that they are tightened according to the manufacturer specifications as noted in your repair manual. After the control arm has been replaced, you can now safely take off the spring compressor and steel chain.

The last step on how to repair coil springs on car or truck is to install back any other parts that had to be removed to help you access them in the first place. After this is completed, the tires and wheels can be put back on to finalize the installation procedure of replacing coil springs on the vehicle. You can only repeat all the steps above on the remaining three corners of your automobile.